Hardwood Sanding & Refinishing
Our #1 specialty in Clarksville, TN
Breathe new life into your existing hardwood floors with Clarksville's refinishing specialists. Our dustless sanding system and low-VOC, pet-safe finishes make your floors look brand new — without the mess, harsh fumes, or long downtime of traditional refinishing.
About This Service
Refinishing is almost always faster, cheaper, and greener than tearing out and replacing hardwood — and when it's done right, the result is indistinguishable from a brand new floor. Solid hardwood can typically be sanded and refinished 4–7 times over its lifetime, and even most engineered hardwoods with a thick wear layer can be refinished at least once. That means the floor already in your home is likely a decades-long investment we can restore for a fraction of replacement cost.
What sets Martinez Flooring apart is the combination of true dustless containment, water-based low-VOC finishes, and an obsessive attention to prep. We don't just sand — we inspect for cupping, gaps, squeaks, popped nails, and damaged boards before we ever start. Any board-level repairs are woven in and blended so the finished floor reads as one continuous, seamless surface.
Whether you want to keep the original character of a 1940s Clarksville bungalow, modernize a builder-grade oak floor with a rich stain, or restore a wide-plank white oak to bright natural, we walk you through the exact look on your actual wood with sample panels before committing. No guesswork, no surprises.
Signs You Need This Service
- Deep scratches, pet damage, or gouges that go through the finish
- Gray, black, or water-stained boards near sinks, doors, or windows
- Cupping, crowning, or gapping between boards
- Dull, hazy, or worn-through finish in high-traffic paths
- You want to change the stain color of your existing wood
- Floors were previously refinished and are starting to look tired again
Why Choose Us
Eco-Friendly Finishes
Low-VOC and water-based finishes that are better for your family, pets, and indoor air quality.
Pet-Safe Process
Non-toxic sealers and stains — safe for dogs, cats, and kids to walk on once cured.
Dustless Sanding
Our containment system captures 99% of dust at the source, so your home stays clean.
Custom Stain Matching
Match an existing floor or create a whole new look with our full range of stain colors.
Faster Return to Normal
Fast-drying finishes mean you're back on your floors in days, not weeks.
Screen & Recoat Option
A lighter-touch service that refreshes worn finish without a full sand-down.
Materials & Options
Water-Based Polyurethane
Low-VOC, non-yellowing, dries fast. Our go-to for families with kids, pets, or asthma.
Oil-Modified Polyurethane
Classic amber warmth, extremely durable. Great for traditional oak and pine floors.
Hardwax Oil (Rubio Monocoat-style)
Natural matte look, easy spot repair, zero VOC. Popular on white oak and walnut.
Custom Stains
From bright natural to jacobean, ebony, and custom-mixed colors — always sampled on your floor first.
Our Process
- 1
Free On-Site Estimate
We inspect your floors, discuss goals, and give a transparent quote.
- 2
Dustless Sanding
Multi-grit sanding with our HEPA containment system to level and prep the wood.
- 3
Stain (Optional)
Choose from natural, warm, or dark stains — sample panels shown on your actual floor.
- 4
Sealer & Finish
Two to three coats of low-VOC finish, buffed between coats for a flawless surface.
- 5
Cure & Walk-Through
Light foot traffic in 24 hours, furniture back in a few days, full cure in about 2 weeks.
Care & Maintenance
- Wait 24 hours before light foot traffic, 3–5 days before moving furniture back, and about 2 weeks for full cure.
- Use felt pads under all furniture and area rugs in high-traffic zones once fully cured.
- Clean with a pH-neutral hardwood floor cleaner — never vinegar, ammonia, or steam mops.
- Screen-and-recoat every 5–7 years to add a fresh layer of finish and dramatically extend the time between full refinishes.
What It Costs
Most residential refinishing projects in Clarksville run between $3.50 and $6.50 per square foot depending on stain, finish type, and repairs needed. Screen-and-recoat services start lower. Every estimate is free, on-site, and itemized so you know exactly what you're paying for.
Every project is different — call for a free, no-obligation, itemized estimate.
Frequently Asked Questions
Is refinishing safe for pets and kids?
Yes. We use low-VOC, water-based finishes that are pet-safe and family-safe once cured. Most families are back to normal within 48 hours.
How dusty is the process?
Our dustless system captures the vast majority of sanding dust at the source. You won't find dust coated on your furniture or vents.
Can you match my existing floors?
Absolutely. We do sample panels on your actual wood so you can approve the color before we finish the whole floor.
How many times can hardwood be refinished?
Solid 3/4" hardwood can typically be sanded 4–7 times over its life. Engineered hardwood depends on the wear-layer thickness — we'll measure and let you know.
Do we need to move out during the project?
No. Most clients stay in the home. We block off the work area, and the low-VOC finishes we use have minimal odor compared to old-school oil-based products.
Can you fix damaged or water-stained boards?
Yes. We weave in replacement boards, blend the grain, and stain them so the repair disappears into the surrounding floor.
Service Area
Martinez Flooring proudly serves Clarksville, TN and all of Montgomery County — including Sango, St. Bethlehem, Hilldale, Woodlawn, and Cunningham — plus Fort Campbell, Adams, Cedar Hill, Palmyra, Erin, and the greater Nashville area including Springfield, Joelton, and Pleasant View. English & Spanish spoken. Se habla Español.